Non Destructive Testing

Equipment & Accessories » Magnetic - Accessories

Blower Bulbs

Description	Product
Easily puffs air to blow away loose particles not being held by a flux leakage.

Powder Bulbs

Description	Product
Powder bulbs are used to apply magnetic dry powders evenly over the surface of a part that is being magnetically inspected using the dry method.

Flux Indicator Strips

Description	Product
For use with high permeability ferro magnetic parts.

Magnetic Penetrameter

Description	Product
An octagonal shaped indicator made up of 8 segments, one side is covered by a shim.

Test Bar

Description	Product
Provides for the calibration and certification of Magnetic Particle Inspection Yokes.

Magnetic Field Indicator

Description	Product
Pocket size magnetometers used to detect residual magnetism after demagnetising.

Magnetic Stripe Cards

Description	Product	Download Brochure
TYPE 2000 MSC - This card is recognized as a tool for evaluation of fluorescent weth method baths in ASTM E709-01 "Standard Guide for Magnetic Particle Examination", Paragraph 20.6.8 and Appendix X4; as well as in ASTM E-1444-05 "Standard Practice for Magnetic Particle Testing", Appendix X7.3.

Reference Block Type 1 (MTU-3)

Description	Product	Download Brochure
The Reference Block is a permanently magnetized steel disc containing coarse and fine cracks that have been induced onto the surface through a special treatment. The surface is then ground and coated. The disc is used to test the performance of the magnetic particle materials and lighting environment being used and to check the sensitivity of the materials on a daily basis for material degradation and/or bath contamination. A reference photograph accompanies the Reference Block so the existing bath can be compared to indications from an optimum system.